Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Security measures
   Angles of installation of wheels of the car, clearance
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of the steering pump (model with engines 104, 119, 120 and 606)
      Dismantling and assembly of the pump of the amplifier of steering
      Dismantling and assembly of an electronic and adjustable steering column
      Removal and installation of the lower steering shaft
      Removal and installation of the drive of telescopic adjustment of a steering column
      Removal and installation of an emphasis of a pipe
      Dismantling and assembly of an internal pipe
      Installation of the top arm of fastening of a pipe (model to identification number 123446)
      Installation of the top arm of fastening of a pipe (model from identification number 123447)
      Removal and installation of the blocking cylinder (model till 31.08.95 of the issue)
      Removal and installation of the blocking cylinder (model since 1.09.95 of the issue)
      Contact spring
      Removal and installation of average steering draft
      Removal and installation of the pendular lever of the steering drive
      Removal and installation of cross steering draft
+ Body
+ Onboard electric equipment






Steering

Removal and installation of the steering mechanism

General information

The design and the principle of functioning of the movement of the car, sensitive to speed, of the hydrostrengthened steering mechanism are presented on сопр. illyustratsiiya.

Design of the steering mechanism

1 — the Case of the steering mechanism
11 — the Piston
12 — the Case of the top bearing
13 — the Worm
14 — the Insert

35 — the Nut
43 — a bipod Shaft
45 — the Adjusting screw
101 — the Dosing valve


Principle of functioning of the movement of the car of system of strengthening of a wheel, sensitive to speed

Removal

Details of installation of the steering mechanism


 PERFORMANCE ORDER

1. Establish a steering column in the extended situation.
2. Extract liquid from the tank of the amplifier of steering.
3. Disconnect the R-valve (Y10x1) on the left side and disconnect the conducting socket from the steering mechanism.
4. Disconnect cross steering draft (10) from a steering bipod.
5. Disconnect longitudinal steering draft (11) from a steering bipod.
6. Remove a heat-shielding guard (23k).
7. Turn off returnable (30f) and forcing (30i) pipelines.
8. Remove the lock of blocking of a steering shaft. The steering wheel should not have opportunities to rotate, otherwise the contact spring (A45) can be damaged after replacement.
9. Disconnect a steering shaft (80a) from a shaft of the steering mechanism (25).
10. Turn off bolts (23a) and remove the steering mechanism (23).

Installation

Details of installation of the steering mechanism


 PERFORMANCE ORDER

1. Install the steering mechanism in average situation.


2. Install the steering mechanism and tighten it to a support on a forward beam (1kh).
3. Tighten returnable (30f) and forcing (30i) pipelines.
4. Establish a heat-shielding guard (23k).
5. Further installation is carried out as it should be, the return to removal.
6. Fill in liquid in the tank of the amplifier of steering and check work and lack of leaks.