Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
- Brake system
   Specifications
   Arrangement of components of the ASR/ETS traction control system
   Arrangement of components of the amplifier of emergency brake application (BAS)
   Arrangement of components of the ESP system
   Dismantling and assembly of the "Tandem" main brake cylinder (MBC) (model 140.028/032/033/135)
   Removal, installation and check of serviceability of functioning of the servo-driver of the vacuum amplifier of brakes
   Removal and installation of a brake support
   Check of thickness of a brake disk and overlays of brake shoes
   Removal and installation of blocks of the parking brake
   Removal and installation of a forward cable of the drive of the parking brake
   Adjustment of the parking brake
   Wheel ABS sensors - installation details
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Check of thickness of a brake disk and overlays of brake shoes

Check of thickness of a brake disk (61) and overlays of brake shoes (43)


 PERFORMANCE ORDER

1. Lift the car.
2. Remove wheels.
3. Check thickness of overlays of brake shoes (43) on forward and back wheels.
4. Check a brake disk (61) for lack of wear and damages.
5. Measure thickness of a brake disk (035) of forward and back wheels by means of a caliper.
6. Compare results of measurements to requirements Specifications.
7. Establish wheels.
8. Lower the car.