Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car



Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
- Coupling
   + Coupling
   Driveshaft
   + Power shafts
   + Differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Driveshaft

Removal and installation of the driveshaft

Removal

Details of installation of the driveshaft

2 — the Driveshaft
5, 21, 200a — Bolts
6, 20, 36 — Washers
7, 35, 88, 200 — Nuts

18 — an engine Support
19 — an engine support Arm
56 — the Epiploon
87 — the Flange


 PERFORMANCE ORDER

1. Lift the transmission by means of a jack.
2. Turn off a nut of fastening of a support of the engine (35). Turn off bolts (21) with washers and remove an arm of the engine (19) together with a support (18).
3. Unscrew the driveshaft from the transmission. Turn off a bolt (8) of fastening of a shaft of a speedometer (9) and remove it.
4. Weaken adjusting plugs in Cardan's flange. For this purpose use a drift with a diameter of 10 mm and about 150 mm long.
5. Weaken a nut of the driveshaft and move the driveshaft from a flange towards a back part of the car.
6. Turn off bolts (200a).

Installation

Installation is made upside-down.